-
List Of Active Publication
| Journal Article : A REVIEW OF PROBLEM SOLVING TECHNIQUES IN ENGINEERING PROJECT MANAGEMENT - MAPPING THE MIND, DESIGN THINKING APPROACH AND SIX THINKING HATS 2021, 27166201, Penulis Pertama UTHM - First Author, https://doi.org/10.30880/jamea.2021.02.01.003 | |
| Journal Article : THE CHALLENGES IN PRODUCT DESIGN AND DEVELOPMENT IN PROJECT MANAGEMENT TOWARDS IR4.0 2021, 27166201, Penulis Utama - Corresponding Author, https://doi.org/10.30880/jamea.2021.02.01.004 | |
| Journal Article : EFFECT OF POST-REFLOW COOLING RATE ON IMC FORMATION BETWEEN SN-3.0AG-0.5CU-0.5NI (SACN30505) LEAD-FREE SOLDERS AND ELECTROLESS NICKEL/IMMERSION SILVER (ENIMAG) 2020, 22783091, Penulis Bersama - Co-Author, http://www.warse.org/IJATCSE/static/pdf/file/ijatcse73911sl2020.pdf | |
| Journal Article : TWO PARAMETERS WEIBULL ANALYSIS ON MECHANICAL PROPERTIES OF KENAF FIBER UNDER VARIOUS CONDITIONS OF ALKALI TREATMENT 2020, 2229838x, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie | |
| Journal Article : INTERMETALLIC COMPOUND LAYER GROWTH AT THE INTERFACE BETWEEN SN-AG AND ENIMAG SURFACE FINISH 2020, 23473983, Penulis Bersama - Co-Author, http://www.warse.org/IJETER/archives/archivesDetiles/?heading=Vol%208%20No%201.2%20%20(2020)%20S%20I | |
| Journal Article : STUDY ON PROPERTIES OF HEAT-TREATED WC-6CO WITH DIFFERENT
WT. % OF TIC POWDER 2020, 02289787, Penulis Bersama - Co-Author, http://www.akademiabaru.com/doc/ARFMTSV66_N2_P168_178.pdf | |
| Journal Article : INVESTIGATION FOR SHRINKAGE DEFORMATION IN THE DESKTOP 3D PRINTER PROCESS BY USING DOE APPROACH OF THE ABS MATERIALS 2019, 17426588, Penulis Bersama - Co-Author, Tiada | |
| Journal Article : MULTIPLE RESPONSES OPTIMISATION IN INJECTION MOULDING PARAMETER FOR POLYPROPYLENE-NANOCLAY-GIGANTOCHLOA SCORTECHINII VIA TAGUCHI METHOD. 2019, 17426596, Penulis Utama - Corresponding Author, 10.1088/1742-6596/1150/1/012062 | |
| Journal Article : OPTIMIZATION OF INJECTION MOLDING PARAMETERS FOR WC-TAC-6CO 2019, 2227524x, Penulis Bersama - Co-Author, http://www.sciencepubco.com/index.php/IJET | |
| Journal Article : CRITICAL POWDER LOADING AND THE RHEOLOGY OF NANOSIZED CEMENTED CARBIDE WITH TITANIUM CARBIDE AS GRAIN GROWTH INHIBITOR FOR INJECTION MOLDING 2018, 2229838x, Penulis Bersama - Co-Author, http://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/2305/1665 | |
| Journal Article : INVESTIGATION OF CLOTHES RECYCLING AS COLOURING AGENT FOR
POLYPROPYLENE-NANOCLAY NANOCOMPOSITES 2018, 24143413, Penulis Utama - Corresponding Author, https://dx.doi.org/10.20469/ijtes.4.10001-1 | |
| Journal Article : PREPARATION OF INJECTION MOULDING PROCESSING FOR HIGH DENSITY POLYETHYLENE VIA MOLDFLOW ADVISOR 2015 SIMULATION 2018, 18171822, Penulis Utama - Corresponding Author, https://doi.org/10.1166/asl.2018.11168 | |
| Journal Article : OPTIMIZATION OF ALKALI TREATMENT CONDITION ON TENSILE PROPERTIES OF KENAF REINFORCED POLYESTER COMPOSITE USING RESPONSE SURFACE METHOD 2018, 2229838x, Penulis Utama - Corresponding Author, DOI: https://doi.org/10.30880/ijie.xx.xx.xxxx.xx.xxxx | |
| Journal Article : THE OPTIMISATION OF PROCESSING CONDITIONS AND THE EFFECT OF NANOCLAY TOWARDS SNAP FIT SAMPLES 2018, 13143395, Penulis Utama - Corresponding Author, https://acadpubl.eu/hub/2018-118-24/issue24a.html | |
| Journal Article : INJECTION MOULDING PARAMETER OPTIMISATION TO IMPROVE THE QUALITY OF SAMPLE MADE FROM POLYMER NANOCOMPOSITES WITH GIGANTOCHLOA SCORTECHINII FIBRES 2018, 2227524x, Penulis Utama - Corresponding Author, 10.14419/ijet.v7i3.7.25724 | |
| Journal Article : INTERFACIAL SHEAR, TENSILE STRENGTH AND YOUNG MODULUS OF KENAF FIBER : THE EFFECTS FROM DIFFERENT SETTINGS OF ALKALI TREATMENT 2018, 16629795, Penulis Bersama - Co-Author, https://www.scientific.net/KEM.791.10 | |
| Journal Article : MODELLING OF INTEGRAL HINGES VIA CADMOULD 3D -F INJECTION MOULDING SIMULATION 2018, 1943023x, Penulis Utama - Corresponding Author, http://www.jardcs.org/archives-special.php?year=2018&issue=13-Special%20Issue | |
| Journal Article : QUALITY PARTS OF PORTABLE FDM MACHINE
USED IN DIRECT INVESTMENT CASTING 2017, 23198613, Penulis Bersama - Co-Author, http://www.enggjournals.com/ijet/docs/IJET16-08-06-220.pdf | |
| Journal Article : OPTIMUM INJECTION MOULDING PROCESSING CONDITION TO REDUCE SHRINKAGE AND WARPAGE FOR POLYPROPYLENE-NANOCLAY-BAMBOO FIBRE WITH COMPATIBILIZER 2017, 16629752, Penulis Utama - Corresponding Author, 10.4028/www.scientific.net/MSF.889.51 | |
| Journal Article : THE EFFECT OF ALKALI TREATMENT UNDER VARIOUS CONDITIONS ON PHYSICAL PROPERTIES OF KENAF FIBER 2017, 17426596, Penulis Bersama - Co-Author, http://iopscience.iop.org/article/10.1088/1742-6596/914/1/012030/meta | |
| Journal Article : OPTIMISATION OF PROCESSING CONDITION FOR FLEXURAL STRENGTH OF POLYPROPYLENE-NANOCLAY-GIGANTOCHLOA SCORTECHINII NANOCOMPOSITES 2016, 18187803, Penulis Utama - Corresponding Author, http://medwelljournals.com/abstract/?doi=jeasci.2016.2668.2672 | |
| Journal Article : EFFECT OF BEATING PROCESS TO SODA ANTHRAQUINONE PULP OF OIL PALM MALE FLOWER SPIKES FIBRE 2015, 1662-7482, Penulis Bersama - Co-Author, https://www.scientific.net/AMM.773-774.158 | |
| Journal Article : SODA ANTHRAQUINONE PULPING OF OIL PALM MALE FLOWER SPIKES 2014, 1662-7482, Penulis Bersama - Co-Author, https://www.scientific.net/AMM.660.373 | |
| Journal Article : DEVELOPMENT OF PAPER USING COIR FIBERS AS A PACKAGING PRODUCT 2013, 2077-2076, Penulis Utama - Corresponding Author, http://scialert.net/abstract/?doi=ajsr.2013.207.216 | |
| Journal Article : A REVIEW OF PROBLEM SOLVING TECHNIQUES IN ENGINEERING PROJECT MANAGEMENT - MAPPING THE MIND, DESIGN THINKING APPROACH AND SIX THINKING HATS. 1995, 27166201, Penulis Utama - Corresponding Author, https://penerbit.uthm.edu.my/ojs/index.php/jamea/article/view/8324 | |
| Book Chapter : GREEN COMPOSITE MANUFACTURING TECHNOLOGY 2020, 9789672389859, Penulis Bersama - Co-Author, Tiada | |
| Book Chapter : GREEN COMPOSITE MANUFACTURING TECHNOLOGY 2020, 9789672389859, Penulis Bersama - Co-Author, Tiada | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, https://www.sciencedirect.com/science/article/pii/B9780128035818115541 | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, https://www.sciencedirect.com/science/article/pii/B9780128035818109932 | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, http://www.sciencedirect.com/science/article/pii/B9780128035818115577 | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, https://www.sciencedirect.com/science/article/pii/B9780128035818115553 | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, http://www.sciencedirect.com/science/article/pii/B9780128035818115565 | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, http://www.sciencedirect.com/science/article/pii/B9780128035818111403 | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, http://www.sciencedirect.com/science/article/pii/B9780128035818111385 | |
| Book Chapter : REFERENCE MODULE IN MATERIALS SCIENCE AND MATERIALS ENGINEERING 2019, 9780128035818, Penulis Dalam Bab, http://www.sciencedirect.com/science/article/pii/B9780128035818111397 | |
| Conference / Seminar : SURFACE TEMPERATURE AND DELAY TIME ANALYSIS OF PATCHED FIBER REINFORCED POLYMER USING INFRARED THERMOGRAPHY | |
| Conference / Seminar : MULTIPLE RESPONSES INJECTION MOULDING PARAMETER OPTIMISATION VIA TAGUCHI METHOD FOR POLYPROPYLENE-NANOCLAY-GIGANTOCHLOA SCORTECHINII | |
| Conference / Seminar : OPTIMIZATION OF PROCESSING CONDITIONS ON MECHANICAL PROPERTIES OF POLYPROPYLENE NANOCOMPOSITE REINFORCED WITH GIGANTOCHLOA SCORTECHINII VIA ANOVA | |
| Conference / Seminar : THE COMPARISON ON MOLD DESIGN FOR INJECTED MOLDED INTEGRAL HINGES TEST SAMPLE VIA AUTODESK MOLD FLOW ADVISER 2019 | |
| Conference / Seminar : DEVELOPMENT AND CHARACTERIZATION OF INJECTION MOULDING MOULD FOR ULNA
IMPLANT
| |
| Conference / Seminar : DEVELOPMENT AND CHARACTERIZATION OF INJECTION MOULDING MOULD FOR ULNA IMPLANT | |
| Conference / Seminar : THE OPTIMISATION OF PROCESSING CONDITION FOR INJECTED MOULD POLYPROPYLENE-NANOCLAY-GIGANTOCHLOA SCORTECHINII BASED ON MELT FLOW INDEX | |
| Conference / Seminar : INJECTION MOULDING REPROCESSING CYCLES EFFECTS TOWARDS MECHANICAL PROPERTIES OF POLYPROPYLENE NANOCLAY | |
| Conference / Seminar : THE PREDICTION OF QUALITY PERFORMANCE BASED ON THE MODELLING OF INJECTION MOULDING PROCESSING CONDITIONS FOR POLYPROPYLENE NANOCLAY INTEGRAL HINGE | |
| Conference / Seminar : INVESTIGATION OF CLOTHES RECYCLING AS COLORING AGENT FOR POLYPROPYLENE NANOCLAY NANOCOMPOSITES | |
| Conference / Seminar : OPTIMISATION OF INJECTION MOULDING PARAMETER TOWARDS SHRINKAGE AND WARPAGE FOR POLYPROPYLENE-NANOCLAY-GIGANTOCHLOA SCORTECHINII NANOCOMPOSITES | |
| Conference / Seminar : REVIEW OF METAL INJECTION MOLDING- PROCESS, OPTIMIZATION, DEFECTS AND MICROWAVE SINTERING ON WC-CO CEMENTED CARBIDE | |
| Conference / Seminar : CHARACTERIZETION OF FLEXURAL STRENGTH, WARPAGE AND SHRINKAGE OF POLYPROPYLENE-NANOCLAY-NANOCOMPOSITES BLEND WITH GIGANTOCHLOA SCORTECHINII | |
| Conference / Seminar : GREEN DENSITY OPTIMIZATION OF STAINLESS STEEL
POWDER VIA METAL INJECTION MOLDING BY TAGUCHI METHOD | |
| Conference / Seminar : FEASIBILITY STUDY ON IPMC ACTUATED CONTRACTILE WATER JET THRUSTER BODY CONTRACTION | |
| Conference / Seminar : COMPOUNDING OF RECYCLED CLOTHES WITH POLYPROPYLENE-NANOCLAY FOR INJECTION MOLDING FEEDSTOCK | |
| Conference / Seminar : OPTIMISING INJECTION MOULDING PARAMETERS THAT SATISFIES PART QUALITIES BY USING TAGUCHI METHOD | |
| General Publication : PROFESSIONAL DIPLOMA IN PLASTICS INJECTION MOLDING ENGINEERING (PDPIME) 2020, -, Penulis Bersama - Co-Author, 9789671761441 | |
| General Publication : BNK 20103 PRINCIPLES OF PACKAGING 2019, -, Penulis Bersama - Co-Author, 11-0261 | |
| General Publication : UNIT 3 - PROPERTIES OF GLASS, MANUFACTURING, DESIGN AND PERFORMANCE OF GLASS 2009, -, Penulis Utama - Corresponding Author, - | |
| General Publication : UNIT 4 - PROPERTIES OF METAL BASED PACKAGING MATERIALS 2009, -, Penulis Utama - Corresponding Author, - | |
| General Publication : UNIT 5 - MANUFACTURING DESIGN AND PERFORMANCE OF RIGID AND FLEXIBLE METAL PACKAGES 2009, -, Penulis Utama - Corresponding Author, - |
