Expert Finder

  1. Home
  2. Expert Finder
User profile picture
RD KHAIRILHIJRA' BIN KHIROTDIN
khairil@uthm.edu.my
View Curriculum Vitae

Note : H-index and Citation are based on current records accessed through the Scopus API.


  • List Of Active Publication
    • Journal Article : A STUDY OF FREQUENCY AND PULSES FOR STEPPER MOTOR CONTROLLER SYSTEM BY USING PROGRAMMABLE LOGIC CONTROLLER
    2019, 17426588, Penulis Bersama - Co-Author, https://iopscience.iop.org/article/10.1088/1742-6596/1150/1/012040

    Journal Article : OVERVIEW OF PRINTING WEARABLE ANTENNA
    2018, 11129867, Penulis Utama - Corresponding Author, file:///D:/Users/uthm2019/Downloads/171536-Article%20Text-440356-1-10-20180521.pdf

    Journal Article : PRINTING AND CURING OF CONDUCTIVE INK TRACK ON CURVATURE SUBSTRATE USING FLUID DISPENSING SYSTEM AND OVEN
    2017, 1816093x, Penulis Utama - Corresponding Author, http://www.engineeringletters.com/issues_v25/issue_3/EL_25_3_16.pdf

    Journal Article : PRINTING AND CURING SILVER CONDUCTIVE INK TRACKS FROM MODIFIED ON-SHELF INKJET PRINTER ON FABRIC
    2017, 22272771, Penulis Utama - Corresponding Author, http://ijens.org/Vol_16_I_06/164004-1606-3737-IJMME-IJENS.pdf

    Journal Article : INVESTIGATION OF CURING CONDUCTIVE INKS ON FABRICS USING DLP PROJECTOR AND HOT PLATE
    2017, 978303835778, Penulis Utama - Corresponding Author, https://www.matec-conferences.org/articles/matecconf/abs/2017/49/matecconf_icme2017_00047/matecconf_icme2017_00047.html

    Journal Article : PERFORMANCE EVALUATION OF STRAIN GAUGE PRINTED USING AUTOMATIC FLUID DISPENSING SYSTEM ON CONFORMAL SUBSTRATES
    2017, 17578981, Penulis Utama - Corresponding Author, https://iopscience.iop.org/article/10.1088/1757-899X/226/1/012019/pdf

    Journal Article : PRINTING AND CURING OF CONDUCTIVE INK TRACK ON FABRIC USING SYRINGE DEPOSITION WITH DLP PROJECTOR AND HOT PLATE
    2017, 2261236x, Penulis Utama - Corresponding Author, https://www.matec-conferences.org/articles/matecconf/abs/2017/49/matecconf_icme2017_00047/matecconf_icme2017_00047.html

    Journal Article : PRINTING OF CONDUCTIVE INK TRACKS ON TEXTILES USING SILKSCREEN PRINTING
    2016, 18196608, Penulis Utama - Corresponding Author, http://www.arpnjournals.org/jeas/research_papers/rp_2016/jeas_0516_4324.pdf

    Journal Article : INVESTIGATION OF DLP PROJECTOR AS AN ENERGY LIGHT SOURCE TO CURE SILVER CONDUCTIVE INK
    2015, 1660-9336, Penulis Utama - Corresponding Author, http://www.scientific.net/AMM.773-774.13

    Book Chapter : ADDITIVE MANUFACTURING ¿ RESEARCH AND DEVELOPMENT SERIES 2
    2020, 9789672916383, Penulis Dalam Bab, Tiada

    Book Chapter : ADDITIVE MANUFACTURING ¿ RESEARCH AND DEVELOPMENT SERIES 2
    2020, 9789672916383, Penulis Dalam Bab, Tiada

    Book Chapter : ADDITIVE MANUFACTURING ¿ RESEARCH AND DEVELOPMENT: SERIES 1
    2020, 9789672916376, Penulis Dalam Bab, Tiada

    Book : ADDITIVE MANUFACTURING RESEARCH AND DEVELOPMENT : SERIES 2
    2020, 9789672916383, Penyunting, Tiada

    Conference / Seminar : INVESTIGATION OF REDUCING CURING TIME OF SILVER CONDUCTIVE INK USING HALOGEN LAMP ON POLYMER SUBSTRATE
    2020, 97898814049, Penulis Utama - Corresponding Author,

    Conference / Seminar : PERFORMANCE EVALUATION OF WEARABLE ANTENNA PRINTED USING SYRINGE-BASED DEPOSITION SYSTEM ON FABRIC
    2019, 1757899x, Penulis Utama - Corresponding Author,

    Conference / Seminar : PRINTING AND CURING OF CONDUCTIVE INKS ON FABRIC USING SYRINGE-BASED DEPOSITION SYSTEM AND OVEN FOR WEARABLE ANTENNA APPLICATION
    2019, 17426588, Penulis Utama - Corresponding Author,

    Conference / Seminar : INVESTIGATION OF PRINTING AND CURING MICRO CONDUCTIVE INK TRACK USING SYRINGE-BASED DEPOSITION SYSTEM AND OVEN ON FABRIC
    2019, 17426588, Penulis Utama - Corresponding Author,

    Conference / Seminar : PRINTING OF WEARABLE ANTENNA ON TEXTILE
    2018, 2261236x, Penulis Utama - Corresponding Author,

    Conference / Seminar : PCL/PLA POLYMER COMPOSITE FILAMENT FABRICATION USING FULL FACTORIAL DESIGN (DOE) FOR FUSED DEPOSITION MODELLING
    2017, 17426596, ,

    General Publication : POSTGRADUATE FKMP UTHM WEBSITE
    2022, -, Penulis Bersama - Co-Author, https://www.youtube.com/watch?v=kQ0iwD7Oz5E

    General Publication : FKMP POSTGRADUATE HANDBOOK V2.0
    2022, -, Penulis Bersama - Co-Author, 03-0294

    General Publication : FKMP POSTGRADUTE PROGRAMMES HANDBOOK V 2.0
    2021, -, Penulis Bersama - Co-Author, 03-0294

  • List of Collaborators
    •          
           User Image
      Dr. NURHAFIZZAH BINTI HASSAN   ( 12 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     hafizzah@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. REAZUL HAQ BIN ABDUL HAQ   ( 9 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     reazul@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ts. Dr. MUSTAFFA BIN HJ IBRAHIM   ( 5 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     mustaffa@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ts. Dr. OMAR MOHD FAIZAN BIN MARWAH @ OMAR   ( 5 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     mdfaizan@uthm.edu.my
    		  
             
           User Image
      Dr. NASUHA BIN SA'UDE   ( 4 publications )
     SENIOR LECTURER
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     nasuha@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Dr. SHARIFAH ADZILA BINTI SYED ABU BAKAR   ( 4 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     adzila@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. NORMAYATI BINTI NORDIN   ( 3 publications )
     SENIOR LECTURER
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     mayati@uthm.edu.my
    		  
             
           User Image
      Dr. HO FU HAW   ( 3 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     fhho@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. KHAIRU BIN KAMARUDIN   ( 3 publications )
     
     FACULTY OF ENGINEERING TECHNOLOGY
     khairu@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. SAID BIN AHMAD   ( 3 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     said@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ts. Dr. MOHD RASIDI BIN IBRAHIM   ( 2 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     rasidi@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. MOHD SALLEHUDDIN BIN YUSOF   ( 2 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     mdsalleh@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ir. Ts. Dr. BUKHARI BIN MANSHOOR   ( 2 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     bukhari@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Dr. SAMSUL HAIMI BIN DAHLAN   ( 2 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING
     samsulh@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ir. Dr. FAUZIAHANIM BINTI CHE SEMAN   ( 2 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING
     fauziahs@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ir. Ts. Dr. MOHD NASRULL BIN ABDOL RAHMAN   ( 2 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     mnasrull@uthm.edu.my
    		  
             
           User Image
      ENCIK SHAMSULKHAIRI BIN MD SALLEH   ( 1 publications )
     SENIOR DEPUTY REGISTRAR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     shamsul@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. ISHKRIZAT BIN TAIB   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     iszat@uthm.edu.my
    		  
             
           User Image
      Dr. NOORMAZIAH BINTI JAFFERI   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     normazia@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Dr. MUHAMAD ZAINI BIN YUNOS   ( 1 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     mzaini@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. MOHD FAHRUL BIN HASSAN   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     fahrul@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. SUHAIMI BIN HASSAN   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     suhaimihas@uthm.edu.my
    		  
             
           User Image
      Ir. MOHD AMRAN BIN MADLAN   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     amran@uthm.edu.my
    		  
             
           User Image
      PROF. Ts. Dr. ZAIDI BIN EMBONG   ( 1 publications )
     
     FACULTY OF APPLIED SCIENCES AND TECHNOLOGY
     zaidi@uthm.edu.my
    		  
             
           User Image
      Dr. LEE WOON KIOW   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     wklee@uthm.edu.my
    		  
             
           User Image
      Ts. Dr. AHMAD MUBARAK BIN TAJUL ARIFIN   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     mubarak@uthm.edu.my
    		  
             
           User Image
      PUAN HELYYANA BINTI MOHD YATIM   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     helyyana@uthm.edu.my
    		  
             
           User Image
      Ts. QAMARUL EZANI BIN KAMARUDIN   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     ezani@uthm.edu.my
    		  
             
           User Image
      ENCIK RAZIF BIN SALIM   ( 1 publications )
     ASSISTANT ADMINISTRATION OFFICER
     UNIVERSITY SPORT CENTRE
     razifs@uthm.edu.my
    		  
             
           User Image
      ENCIK ABDUL HADI BIN MOHAMED ZAINAL   ( 1 publications )
     
     
     abdhadi@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ir. Dr. SUFIZAR BINTI AHMAD   ( 1 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     sufizar@uthm.edu.my
    		  
             
           User Image
      PROF. MADYA Ir. Ts. Dr. AL EMRAN BIN ISMAIL   ( 1 publications )
     ASSOCIATE PROFESSOR
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     emran@uthm.edu.my
    		  
             
           User Image
      PROF. Ir. Dr. MD SAIDIN BIN WAHAB   ( 1 publications )
     
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     saidin@uthm.edu.my
    		  
             
           User Image
      Ir. Ts. MAZNAN BIN ISMON   ( 1 publications )
     INDUSTRY FELLOW
     FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING
     maznan@uthm.edu.my
    		  
  • List Of Active Publication
    • Journal Article : A STUDY OF FREQUENCY AND PULSES FOR STEPPER MOTOR CONTROLLER SYSTEM BY USING PROGRAMMABLE LOGIC CONTROLLER
    2019, 17426588, Penulis Bersama - Co-Author, https://iopscience.iop.org/article/10.1088/1742-6596/1150/1/012040

    Journal Article : OVERVIEW OF PRINTING WEARABLE ANTENNA
    2018, 11129867, Penulis Utama - Corresponding Author, file:///D:/Users/uthm2019/Downloads/171536-Article%20Text-440356-1-10-20180521.pdf

    Journal Article : PRINTING AND CURING OF CONDUCTIVE INK TRACK ON CURVATURE SUBSTRATE USING FLUID DISPENSING SYSTEM AND OVEN
    2017, 1816093x, Penulis Utama - Corresponding Author, http://www.engineeringletters.com/issues_v25/issue_3/EL_25_3_16.pdf

    Journal Article : PRINTING AND CURING SILVER CONDUCTIVE INK TRACKS FROM MODIFIED ON-SHELF INKJET PRINTER ON FABRIC
    2017, 22272771, Penulis Utama - Corresponding Author, http://ijens.org/Vol_16_I_06/164004-1606-3737-IJMME-IJENS.pdf

    Journal Article : INVESTIGATION OF CURING CONDUCTIVE INKS ON FABRICS USING DLP PROJECTOR AND HOT PLATE
    2017, 978303835778, Penulis Utama - Corresponding Author, https://www.matec-conferences.org/articles/matecconf/abs/2017/49/matecconf_icme2017_00047/matecconf_icme2017_00047.html

    Journal Article : PERFORMANCE EVALUATION OF STRAIN GAUGE PRINTED USING AUTOMATIC FLUID DISPENSING SYSTEM ON CONFORMAL SUBSTRATES
    2017, 17578981, Penulis Utama - Corresponding Author, https://iopscience.iop.org/article/10.1088/1757-899X/226/1/012019/pdf

    Journal Article : PRINTING AND CURING OF CONDUCTIVE INK TRACK ON FABRIC USING SYRINGE DEPOSITION WITH DLP PROJECTOR AND HOT PLATE
    2017, 2261236x, Penulis Utama - Corresponding Author, https://www.matec-conferences.org/articles/matecconf/abs/2017/49/matecconf_icme2017_00047/matecconf_icme2017_00047.html

    Journal Article : PRINTING OF CONDUCTIVE INK TRACKS ON TEXTILES USING SILKSCREEN PRINTING
    2016, 18196608, Penulis Utama - Corresponding Author, http://www.arpnjournals.org/jeas/research_papers/rp_2016/jeas_0516_4324.pdf

    Journal Article : INVESTIGATION OF DLP PROJECTOR AS AN ENERGY LIGHT SOURCE TO CURE SILVER CONDUCTIVE INK
    2015, 1660-9336, Penulis Utama - Corresponding Author, http://www.scientific.net/AMM.773-774.13

    Book Chapter : ADDITIVE MANUFACTURING ¿ RESEARCH AND DEVELOPMENT SERIES 2
    2020, 9789672916383, Penulis Dalam Bab, Tiada

    Book Chapter : ADDITIVE MANUFACTURING ¿ RESEARCH AND DEVELOPMENT SERIES 2
    2020, 9789672916383, Penulis Dalam Bab, Tiada

    Book Chapter : ADDITIVE MANUFACTURING ¿ RESEARCH AND DEVELOPMENT: SERIES 1
    2020, 9789672916376, Penulis Dalam Bab, Tiada

    Book : ADDITIVE MANUFACTURING RESEARCH AND DEVELOPMENT : SERIES 2
    2020, 9789672916383, Penyunting, Tiada

    Conference / Seminar : INVESTIGATION OF REDUCING CURING TIME OF SILVER CONDUCTIVE INK USING HALOGEN LAMP ON POLYMER SUBSTRATE
    2020, 97898814049, Penulis Utama - Corresponding Author,

    Conference / Seminar : PERFORMANCE EVALUATION OF WEARABLE ANTENNA PRINTED USING SYRINGE-BASED DEPOSITION SYSTEM ON FABRIC
    2019, 1757899x, Penulis Utama - Corresponding Author,

    Conference / Seminar : PRINTING AND CURING OF CONDUCTIVE INKS ON FABRIC USING SYRINGE-BASED DEPOSITION SYSTEM AND OVEN FOR WEARABLE ANTENNA APPLICATION
    2019, 17426588, Penulis Utama - Corresponding Author,

    Conference / Seminar : INVESTIGATION OF PRINTING AND CURING MICRO CONDUCTIVE INK TRACK USING SYRINGE-BASED DEPOSITION SYSTEM AND OVEN ON FABRIC
    2019, 17426588, Penulis Utama - Corresponding Author,

    Conference / Seminar : PRINTING OF WEARABLE ANTENNA ON TEXTILE
    2018, 2261236x, Penulis Utama - Corresponding Author,

    Conference / Seminar : PCL/PLA POLYMER COMPOSITE FILAMENT FABRICATION USING FULL FACTORIAL DESIGN (DOE) FOR FUSED DEPOSITION MODELLING
    2017, 17426596, ,

    General Publication : POSTGRADUATE FKMP UTHM WEBSITE
    2022, -, Penulis Bersama - Co-Author, https://www.youtube.com/watch?v=kQ0iwD7Oz5E

    General Publication : FKMP POSTGRADUATE HANDBOOK V2.0
    2022, -, Penulis Bersama - Co-Author, 03-0294

    General Publication : FKMP POSTGRADUTE PROGRAMMES HANDBOOK V 2.0
    2021, -, Penulis Bersama - Co-Author, 03-0294

  • Areas of Research Interest
    •               
    Direct write technologies

                  
    Printing technologies

                  
    Rapid prototyping, tooling and manufacturing

  • List of Grant Awarded
    • 01-OCT-23 ~ 30-SEP-25 K473 : Amelioration of predictive modelling of printing of conductive ink on multiple substrates to reduce manufacturing time and cost for Direct Write/Print (DW) application
    Model, Printing, Conductive ink, Substrate, Time, Cost, Kebangsaan, RM 133100

    01-MAY-23 ~ 30-APR-25 Q357 : NUMERICAL AND EXPERIMENTAL INVESTIGATION ON DEPOSITION OF CONDUCTIVE INK ON MULTIPLE SUBSTRATES
    Numerical, experimental, deposition, conductive ink, substrates, Universiti, RM 20000

    01-NOV-23 ~ 30-APR-25 Q581 : NUMERICAL AND EXPERIMENTAL INVESTIGATION ON DEPOSITION OF CONDUCTIVE INK ON MULTIPLE SUBSTRATES WITH DIFFERENT SUBSTRATE SURFACE ENERGY AND SURFACE TENSION PROPERTIES
    Conductive ink, Deposition, Curing, Substrates, Surface Energy, Surface Tension, Universiti, RM 27000

    01-APR-22 ~ 31-AUG-22 M093 : ADDITIVE MANUFACTURING OF AEROSPACE TOOLS AND COMPONENTS (AMAtoc)
    Additive Manufacturing , 3D Printing, Global Aerospace Additive Manufacturing Market , , Kebangsaan, RM 24000

    01-SEP-19 ~ 30-SEP-21 K201 : Thixotropic relationship between kenaf powder admixtures and layerability assessment of sustainable cementitious paste via 3D concrete printing (3DCP)
    Concrete printing, Extrusion, 3DCP, Thixotropic, Rheology, Kenaf, Additive Manufacturing, Kebangsaan, RM 94700

    01-SEP-19 ~ 31-AUG-21 K198 : Novel technique using halogen lamp to reduce curing time of conductive ink on flexible substrates for Direct Write (DW) applications
    Halogen lamp, curing, conductive ink, flexible substrate, direct write, Kebangsaan, RM 102400

    01-JUL-19 ~ 30-JUN-21 H478 : Smart Farming Management : Development of Autonomous Spraying Fertilizer by Using Drone in Agricultural Field
    Unmanned Aerial Vehicle (UAV), Drone, Flight Frequency (RF), Sprayer module, Remote sensing, GPS, Universiti, RM 30000

    01-OCT-19 ~ 31-MAR-21 K239 : Development of an Automation Emergency Danger Signal Detector System for Highway Workers Safety
    Signal, Detector, Automation, Kebangsaan, RM 50000

    01-DEC-16 ~ 31-MAR-18 U740 : Investigatiion of printing and curing of electronics structure on non-planar substrate using automatic fluid dispensing system
    automatic fluid dispensing system, Universiti, RM 20800

    01-DEC-14 ~ 30-NOV-17 1494 : Direct write of conductive track on textile materials under several testing conditions for wearable electronics application
    industrial engineering, manufacturing engineering, Kebangsaan, RM 101000

    01-JUN-15 ~ 31-MAY-17 U380 : Investigation of curing conductive silver ink track on fabrics using DLP projector as an alternative energy light source
    DLP projector, Universiti, RM 20000

    01-DEC-14 ~ 30-NOV-16 R052 : Investigation of directly print electronics structure on conformal substrates for structural health and monitoring purposes
    Printing, Sensor, Substrates, depositions, treatment, Kebangsaan, RM 55000

    01-NOV-13 ~ 01-MAY-15 1329 : Feasibility Study on DLP Projector As An Energy Light Source to Cure Silver Conductive Ink Track
    , Universiti, RM 10000

← Back